How to fix your Quark Pegboard to the wall?
P18 and P9: two models, two uses… and two slightly different installation methods.
18mm pegboard
Robust and powerful
High resistance
Ideal for heavy loads
Perfect for professionals and intensive use
9mm Pegboard
Light and practical
Twice as light
More economical
Perfect for small items and wall decoration
The Pegboard P9 requires additional parts that come with the kit.
5-Step Installation
(common to both models)
1.
Prepare the screws
Lightly tighten the 4 screws in the corners of the Pegboard with the provided Torx10 key.
Leave 1 to 2 mm overhang.
2.
Position the Pegboard
Place it on the wall in the desired location.
Use a level to align it horizontally or vertically.
3.
Mark the wall
Hold the pegboard in place and lightly tap the screw heads to mark the drilling points.
4.
Drill the holes
Remove the Pegboard.
Drill the marks with a 6 mm drill bit.
5.
Insert the dowels
Hammer the nylon anchors into the holes.
Additional Steps for the Pegboard P9
5-a.
Fix parts 9A
Screw the 3D printed 9A flat inserts to the back of the Pegboard using two small screws, according to the provided diagram.
5-b.
Position parts 9B
Place the 9B cylindrical inserts at the 4 corners and in the center of the pegboard. These pieces ensure the correct distance between the wall and the board.
6.
Fix the Pegboard
Align the pegboard with the anchors and screw in until the corners are flush against the wall. Use the provided Allen key to finish tightening.
No need to overtighten: the fit is guaranteed.
